1 / 2

Flakers COLLECTION

Eschenfelder Table Flaker — Aluminium Hopper

Manual Cereal Flaker

This Eschenfelder table flaker combines a beech frame with an anodised aluminium hopper. Two nickel-free stainless steel rollers press grain into flakes, with a stepless adjustment for thickness. The open structure gives access for cleaning, while a supplied clamp holds the appliance to a suitable table edge.

Availability, dispatch timing and delivery eligibility for the selected model require confirmation.

Fresh cereal flakes
Solid beech wood
Anodised aluminium
Nickel-free stainless steel

€179.83

Price excluding VAT Indicative estimate calculated excluding VAT. Order requests are accepted. Final prices and destination tax treatment will be confirmed before an order is confirmed.

Select this model to order

Match the clamp to your worktop

The aluminium-hopper table model is a useful starting point in the Eschenfelder range. Check the required edge overhang and clamp depth before selecting it. Compare the wooden-hopper version for a different finish, or the wall model when keeping the worktop clear is a priority.

Explore all cereal flakers or compare Eschenfelder Ash Wood Table Flaker, Eschenfelder Walnut Hopper Table Flaker, Eschenfelder Beech Hopper Table Flaker.

Confirm the actual clamp before measuring fit

Current table-model guidance allows up to 50 mm tabletop thickness and requires at least 40 mm free overhang. Some reference clamps are listed for 45 mm only. Confirm the clamp supplied with this finish before assuming the larger limit applies.

The aluminium hopper is fixed, unlike the removable wooden versions. Follow the cleaning procedure for the open roller frame rather than trying to remove it as a wooden hopper. The approximately 50 g in 20 seconds figure is a reference affected by grain preparation and hand operation.

Frequently asked questions

How does the aluminium hopper differ from the wooden option?

The anodised aluminium hopper is fixed, while the wooden-hopper versions have a removable hopper. Both use the listed nickel-free stainless steel flaking arrangement.

Can the aluminium hopper be removed like the wooden one?

The listed aluminium hopper is fixed. Use the model cleaning instructions; do not assume the removal procedure of a wooden-hopper version applies.

Is every table clamp rated for the same thickness?

The current maker guidance allows 50 mm, but some reference clamps are listed for 45 mm. Confirm the actual supplied clamp and the required 40 mm overhang.

Eschenfelder Table Flaker — Aluminium Hopper specifications

Purpose: Fresh cereal flakes
Operation: Manual
Frame: Solid beech wood
Hopper: Anodised aluminium
Rollers and chute: Nickel-free stainless steel
Flake thickness: Continuously adjustable
Output: Approx. 50 g in 20 seconds
Crank length: 20 cm
Dimensions with crank (H × W × D): 24 × 12 × 24 cm
Weight: 2.15 kg
Mounting: Tabletops up to 4.5 cm for the reference clamp; at least 4 cm free overhang. Check the supplied clamp.

Grains and preparation

Roll cereals other than maize, plus suitable oily seeds, spices and small pulses. Repeat a pass for a finer result. Follow the supplied model instructions and clean grain preparation requirements.

Check the fit for your kitchen

Eschenfelder Table Flaker — Aluminium Hopper: Fresh cereal flakes. Manual. Use the dimensions, mounting and ingredient guidance below to check your setup.

Mounting: Tabletops up to 4.5 cm for the reference clamp; at least 4 cm free overhang. Check the supplied clamp.
Operation: Manual
Grain suitability and preparation are specific to this mechanism; follow the instructions for this exact model.
Manufacturer warranty conditions depend on private or commercial use. A catalogue reference price is not a final consumer quotation.

Explore Eschenfelder equipment, grain mills for flour and grain flakers for cereal flakes.

Compare practical differences

Eschenfelder Table Flaker — Aluminium Hopper and related alternatives
Model	Purpose / drive	Output reference	Setup
Eschenfelder Table Flaker — Aluminium Hopper	Fresh cereal flakes Manual	Approx. 50 g in 20 seconds	Tabletops up to 4.5 cm for the reference clamp; at least 4 cm free overhang. Check the supplied clamp.
Eschenfelder Ash Wood Table Flaker	Fresh cereal flakes Manual	Approx. 50 g in 20 seconds	Tabletops up to 4.5 cm for the reference clamp; at least 4 cm free overhang. Check the supplied clamp.
Eschenfelder Walnut Hopper Table Flaker	Fresh cereal flakes Manual	Approx. 50 g in 20 seconds	Tabletops up to 4.5 cm for the reference clamp; at least 4 cm free overhang. Check the supplied clamp.
Eschenfelder Beech Hopper Table Flaker	Fresh cereal flakes Manual	Approx. 50 g in 20 seconds	Tabletops up to 4.5 cm for the reference clamp; at least 4 cm free overhang. Check the supplied clamp.

Output figures use each model’s stated test conditions and cannot be treated as a universal rate for every grain or texture.

Care and cleaning

Remove residue with a brush; wipe the exterior with a lightly damp cloth. Do not soak the wooden parts or place them in a dishwasher. Do not disassemble the roller assembly; follow the manufacturer cleaning instructions.

What is included?

Flaker, screw clamp and bamboo cleaning brush.

Manufacturer warranty

Manufacturer general instructions state a 24-month warranty for material or manufacturing defects, subject to their terms. Normal wear, improper handling and dismantling damage are excluded. Confirm applicability to the supplied model and destination.

Current manufacturer table-model guidance permits up to 50 mm tabletop thickness and requires at least 40 mm free overhang. Some reference clamps are listed for 45 mm only; confirm the clamp supplied with this finish. Wall models use their own mounting drawing, not the table-clamp limits. Output figures are reference values, not a rate guaranteed for every ingredient.

Ordering and delivery

Availability, delivery times and shipping costs will be confirmed before your order is finalised. sales@akitajp.com about this model.

Delivery and payment information · Returns and cancellation