1 / 2
Waldner COLLECTION
Waldner GM30
Commercial Grain Mill
GM30 is a commercial grain mill with a 300 mm porcelain stone milling system. Its large square hopper holds approximately 15 kg of grain, with stepless fineness adjustment and a protected industrial motor. Match the electrical configuration and installation to your site before choosing this model.
Availability, dispatch timing and delivery eligibility for the selected model require confirmation.
- 300 mm porcelain stones
- 750 W motor
- Swiss stone pine wood
- Adjustable flour texture
€3,375.63
Price excluding VAT Indicative estimate calculated excluding VAT. Order requests are accepted. Final prices and destination tax treatment will be confirmed before an order is confirmed.
Select this model to orderA dedicated commercial milling station
GM30 needs a site-specific decision about space, supply and grain handling. Its larger hopper suits a different scale of preparation from a worktop household mill. Confirm the electrical configuration, installation and quoted output conditions before ordering, and plan safe access for filling, flour collection and the cleaning procedure in the manufacturer instructions.
Explore grain mills or compare Waldner Single — alder, Waldner Lady — stone pine, Waldner Mona — larch.
Confirm installation before calculating production
Plan around the listed 80 kg weight and dimensions of 60 cm long, 70 cm deep and 85 cm high. Arrange a suitable position and access for loading the approximately 15 kg hopper before delivery. Confirm the exact electrical configuration for the premises.
The manufacturer's fine-grinding reference is approximately 15–20 kg/hour and varies with the grain and setting. Treat it as an operating-condition reference, not a guaranteed rate for every ingredient. Follow the supplied commercial instructions and disconnect before opening or cleaning the dry stone chamber.
Frequently asked questions
Are the GM30 electrical versions interchangeable?
The catalogue identifies 230 V and 400 V versions, but the exact supplied configuration requires confirmation. Plan the installation around the selected machine, including its 80 kg listed weight.
Is the GM30 hopper capacity its hourly output?
No. Approximately 15 kg describes hopper capacity. The separate fine-grinding reference is approximately 15–20 kg/hour, subject to the stated operating conditions.
Can GM30 process any ingredient because it is commercial?
No. Use only ingredients permitted for the exact machine and follow their preparation guidance. Commercial positioning does not remove moisture or ingredient restrictions.
Waldner GM30 specifications
- Operation
- Electric
- Housing
- Swiss stone pine wood
- Fine flour output
- Approx. 15–20 kg/hour; manufacturer fine-milling figure
- Motor power
- 750 W
- Voltage
- 230 / 400 V versions; exact configuration must be confirmed
- Milling stones
- 300 mm, porcelain stone
- Grain hopper
- Approx. 15000 g
- Mill weight
- 80 kg
- Dimensions (L × D × H)
- 60 × 70 × 85 cm
Grains and preparation
Use clean, dry grain listed in the model manual. Match the fineness setting to the ingredient. Avoid wet material and oil-rich seeds unless expressly permitted for the exact mechanism.
Check the fit for your kitchen
Waldner GM30: Commercial Grain Mill. Electric. Use the dimensions, mounting and ingredient guidance below to check your setup.
- Operation: Electric
- Grain suitability and preparation are specific to this mechanism; follow the instructions for this exact model.
- Manufacturer warranty conditions depend on private or commercial use. A catalogue reference price is not a final consumer quotation.
Explore Waldner equipment, grain mills for flour and grain flakers for cereal flakes.
Compare practical differences
| Model | Purpose / drive | Output reference | Setup |
|---|---|---|---|
| Waldner GM30 | Commercial Grain Mill Electric | Approx. 15–20 kg/hour; manufacturer fine-milling figure | Swiss stone pine wood |
| Waldner Single — alder | Home Flour Mill Electric | Approx. 120 g/min; manufacturer fine-milling figure | Solid alder wood |
| Waldner Lady — stone pine | Home Flour Mill Electric | Approx. 120 g/min; manufacturer fine-milling figure | Swiss stone pine wood |
| Waldner Mona — larch | Home Flour Mill Electric | Approx. 120 g/min; manufacturer fine-milling figure | Solid larch wood |
Output figures use each model’s stated test conditions and cannot be treated as a universal rate for every grain or texture.
Care and cleaning
Disconnect from power before opening or cleaning. Keep the stone milling chamber dry and follow the supplied model instructions.
What is included?
Mill and operating instructions; confirm the exact package and electrical version before ordering.
Manufacturer warranty
Manufacturer commercial warranty terms to be confirmed
Output varies with grain and fineness. Confirm the electrical version, destination plug and any installation requirements before ordering. The GM30 reference price is indicative; the exact 230 V or 400 V configuration and current quotation require confirmation.
Ordering and delivery
Availability, delivery times and shipping costs will be confirmed before your order is finalised. sales@akitajp.com about this model.
Waldner Single — alder
Waldner Lady — stone pine
Waldner Mona — larch